ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

活塞-缸套周期性瞬態傳熱仿真
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為解決計算柴油機單個零部件傳熱時邊界條件難以確定的問題,用耦合傳熱的方法,,把活塞,、缸套傳熱時的外邊界條件變成內邊界處理,利用有限元軟件進行建模仿真,。以X6130型柴油機為例,,用有限元分析軟件ANSYS建立了活塞-缸套的三維模型,并對其額定工況下一個工作循環內的瞬態傳熱進行了仿真計算,,得到了活塞-缸套上關鍵點的溫度波動曲線,。部分計算結果和實驗結果對比表明:用耦合方法模擬活塞-缸套之間的傳熱過程是可行的,且仿真結果與實測數據吻合較好,。

    Abstract:

    In order to solve the difficulty of determining boundary conditions when calculating heat transfer between single parts in diesel engines, outer boundary condition can be transformed to inner boundary condition using coupled heat transfer method, so that heat transfer simulation can conform with the actual working mode, using software to build models and simulate. As an example, piston-cylinder liner of X6130 diesel engine was modeled by FEM software named ANSYS. After simulating transient cyclic heat transfer in rated wording mode, transient temperature curves of piston-cylinder liner key points were gotten. Comparison between simulation data and measurement shows that coupled method is feasible to simulate piston-cylinder liner heat transfer, and simulation results are in good agreement with experimental data.

    參考文獻
    相似文獻
    引證文獻
引用本文

李迎,俞小莉,陸國棟,李紅珍.活塞-缸套周期性瞬態傳熱仿真[J].農業機械學報,2007,38(1):60-64.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(1):60-64.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼