脈寬調制型變量噴霧控制ECU設計與分析

doi:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

首頁 > 過刊瀏覽>2007年第38卷第1期 >123-126. DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

脈寬調制型變量噴霧控制ECU設計與分析
DOI:
                        10.3969/j.issn.1000-1298.[year].1.[sequence]
                    
CSTR:
                        
                    
作者:
                        
                        
                    
作者單位:
作者簡介:
通訊作者:
中圖分類號:
基金項目:

Author:

Affiliation:

Fund Project:

摘要

圖/表

訪問統計

參考文獻

相似文獻

引證文獻

資源附件

文章評論

摘要:

提出一種脈寬調制型變量噴霧ECU設計方案,，設計包含通訊單元及控制單元,，通訊單元通過CAN總線可與拖拉機上配置的控制器直接聯系；控制單元則利用斬波橫流電路提高了系統電磁回路的響應速度,。利用EDA手段并結合實驗,，對控制單元的斬波橫流電路進行了分析和研究,。結果表明使用斬波橫流電路使電流上升時間為4.5 ms，下降時間為9 ms,，并使流量隨占空比線性增加,。

Abstract:

The modulated spraying nozzle control (MSNC) system equipped with pulse-width modulation (PWM) nozzle is a new kind of variable rate technology (VRT) for spraying. A design-scheme of the electronic control unit（ECU）was investigated for the PWM nozzle, which included a communication unit that could transmit messages between the computer and the ECU in the tractor, and the control unit which might improve the response speed by using the cross-current chop-wave circuit. Using EDA tools, the simulation and the experiment were carried out to study the circuit. The results show that with this unit the rising edge of the circuit is 4.5 ms and the falling edge is 9 ms. Furthermore, the relationship between flow rate and duty cycle is linear.

參考文獻

相似文獻

引證文獻

引用本文

焦俊生,張偉.脈寬調制型變量噴霧控制ECU設計與分析[J].農業機械學報,2007,38(1):123-126.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(1):123-126.

復制

文章指標

點擊次數:
下載次數:
HTML閱讀次數:
引用次數:

歷史

收稿日期:
最后修改日期:
錄用日期:
在線發布日期:
出版日期:

期刊瀏覽

EI收錄結果

引用本文

分享

文章指標

歷史

文章二維碼