液壓挖掘機工作裝置整體集成有限元分析

doi:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

首頁 > 過刊瀏覽>2007年第38卷第10期 >20-23. DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]

液壓挖掘機工作裝置整體集成有限元分析
DOI:
                        10.3969/j.issn.1000-1298.[year].10.[sequence]
                    
CSTR:
                        
                    
作者:
                        
                        
                    
作者單位:
作者簡介:
通訊作者:
中圖分類號:
基金項目:

Author:

Affiliation:

Fund Project:

摘要

圖/表

訪問統計

參考文獻

相似文獻

引證文獻

資源附件

文章評論

摘要:

以某挖掘機的工作裝置整體為研究對象,，在對液壓挖掘機的典型工況進行全面分析的基礎上,，從系統集成的角度建立了完整的工作裝置三維集成有限元模型，對工作裝置進行了5種典型工況下的強度,、變形及模態分析,并結合實際產品開發進行了驗證,。分析結果表明,，基于工作裝置整體的集成有限元分析方法極大地降低了因構件簡化等原因而造成的計算誤差，提升了產品的改進設計水平,。

Abstract:

On the basis of working characters, an integrated and refined 3-D finite element analysis for working mechanism was presented. Take excavator as an example, the 3-D model of working mechanism was established. Based on assessment of preliminary finite element, the way of establishing finite element model has been determined. Selected five typical working statuses, the stiffness, strength and modal analysis was made for assembled working mechanism, and test for actual product has been done. The results showed that stress distribution of work mechanism could clearly explain failure cause and the result could be applied as the references for the working mechanism design. The excavator design method has been improved and a new approach was provided for similar product design and analysis.

參考文獻

相似文獻

引證文獻

引用本文

杜文靖,崔國華,劉小光.液壓挖掘機工作裝置整體集成有限元分析[J].農業機械學報,2007,38(10):20-23.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(10):20-23.

復制

文章指標

點擊次數:
下載次數:
HTML閱讀次數:
引用次數:

歷史

收稿日期:
最后修改日期:
錄用日期:
在線發布日期:
出版日期:

期刊瀏覽

EI收錄結果

引用本文

分享

文章指標

歷史

文章二維碼