ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

彈尾形穩流器對搖臂式噴頭內流道水力性能影響
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    對PY-140型搖臂式噴頭在不同的彈尾形穩流器與噴嘴直徑組合工況下進行了噴頭內流道水力性能試驗,。結果表明：噴頭內流道阻力損失與噴嘴直徑、穩流器長度及進口工作壓力呈正比，并建立了回歸模型,；噴管段產生的阻力損失與噴頭內流道阻力損失之比的平均值為0.666,；當進口工作壓力一定時,，噴嘴工作壓力與噴嘴直徑,、穩流器長度呈反比,，噴頭流量的最大相對誤差為4.7%,；錐角為40°的圓錐形噴嘴流量系數算術平均值是

    Abstract:

    0.928,。An experiment was carried out to investigate hydraulic performance in internal flow passage of a PY-140 impact sprinkler with different bullet-shaped straighteners and nozzles. The results showed that total friction loss in internal flow passage was in direct ration to nozzle diameter, length of straightener and inlet pressure. A regression model describing their relations was established. The ratio of friction loss in sprinkler tube to total friction loss was averaged as 0.666. The paper indicated that as inlet pressure was kept constant, nozzle pressure was in inverse proportion to nozzle diameter and length of straightener, and the maximum relative error of flow rate was 4.7%. Finally, the paper recommended that the average discharge coefficient for a conical nozzle angle of 40° was 0.928.

    參考文獻
    相似文獻
    引證文獻
引用本文

嚴海軍,王敏,楊小剛,歐陽俊,余芬芬.彈尾形穩流器對搖臂式噴頭內流道水力性能影響[J].農業機械學報,2007,38(11):40-43.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(11):40-43.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼