ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

滅茬機工作參數的多目標模糊優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    在田間試驗的基礎上,,通過理論分析、均勻設計及數據擬水平處理的方法,,建立了以滅茬機生產效率高和功率消耗小為總體模糊目標,,以機組前進速度,、刀軸轉速和作業寬度為工作參數的多目標模糊優化數學模型并分析了滅茬機各主要工作參數對總體目標的影響規律,。當工作寬度為定值時,,總體目標隨前進速度的增大而快速增大,,隨刀軸轉速的增加而增大;當?shù)遁S轉數定值時,,總體目標水平隨前進速度的增大而快速增大,,隨工作寬度的增加而緩慢增大;當前進速度定值時,,總體目標水平隨刀軸轉速和工作寬度的增加而緩慢減小,。在滿足約束條件的可行域內進行尋優,優化出滅茬機的最佳工作參數為作業寬度1.42m,,刀軸轉速406r/

    Abstract:

    min,,前進速度1.5m/s。Based on the field experiment, and by means of theoretical analysis, uniform design and the data quasi-level processing method, the multi-objects fuzzy optimization mathematical model, which uses the stubble cleaner’s high production efficiency and low power consumption as the goal, uses the machine advance speed, cutter rotating speed and machine width as the working parameters, are developed. The regulation about how the working parameters of stubble cleaner affect the goal is put forward. When the machine width is a fixed value, the goal level will be increased fast with the increasing of the machine advance speed and increased with the increasing of the cutter rotating speed; when the cutter rotating speed is a fixed value, the goal level will be increased fast with the increasing of the advance speed and increased slowly with the spreading of the machine width; when the advance speed is a fixed value, the goal level will be decreased slowly with the spreading of the machine width and the increasing of the cutter rotating speed. The optimization is conducted in the feasible area which is limited by the constraint conditions. The best working parameters of the machine width is 1.42m, the cutter rotating speed is 406r/min and the advance speed is 1.5m/s.

    參考文獻
    相似文獻
    引證文獻
引用本文

魏天路,周海波,楊海,王俊發.滅茬機工作參數的多目標模糊優化[J].農業機械學報,2008,39(6):73-76.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(6):73-76.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼