ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

J積分移動理論的單邊徑向裂紋軸校直行程算法
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    依據彈塑性斷裂理論和實驗,,研究了含裂紋軸中最危險的單邊徑向裂紋軸校直過程,提出了多步加載條件下的J積分移動理論和單邊徑向裂紋軸校直行程遞推算法,。含單邊徑向裂紋軸校直中,,假設多步加載相互獨立,J積分包括Je和Jp兩項,,微小遞增的彈塑性載荷導致裂紋鈍化有助于JIC增加,,J積分值在多次加載中可緩慢向上移動,。基于這一觀點,,結合校直行程遞推算法,,建立了單邊徑向裂紋軸的多步校直行程遞推算法。對裂紋為3mm的單邊徑向裂紋軸實驗的結果表明了JIC移動現象,,并且在對實驗軸4步校直后,,初始0.13mm彎曲值可以減少到0.01mm,而裂紋嘴張開位移限制在

    Abstract:

    0.008mm,。 The J-integral moving theory with multiple loading and shaft straightening stroke increasing algorithm with single-edged crack were presented according to the elastic-plastic fracture mechanic theory and experiments analysis. During multi-step straightening, with the assumption of independent multiple loading, J-integral including two items of Je and Jp, and the crack blunting would promote the JIC increasing, the J-integral could be considered to move up slowly. Based on this view, the multi-step straightening stroke algorithm was built up to the shaft with single-edged crack. The straightening experiment resulted to the shaft with 3mm depth single-edged crack could prove the JIC moving phenomenon, and after 4 steps straightening to the experimented shaft, the initial 0.13mm bend value could be decreased to 0.01mm, while crack mouth opening displacement could be limited to 0.008 mm.

    參考文獻
    相似文獻
    引證文獻
引用本文

翟華. J積分移動理論的單邊徑向裂紋軸校直行程算法[J].農業機械學報,2008,39(8):169-172.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(8):169-172.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼