弧齒錐齒輪大輪齒頂?shù)菇羌庸つＰ团c虛擬加工

doi:10.3969/j.issn.1000-1298.2008.9.080936

首頁 > 過刊瀏覽>2008年第39卷第9期 >161-165. DOI:10.3969/j.issn.1000-1298.2008.9.080936

弧齒錐齒輪大輪齒頂?shù)菇羌庸つＰ团c虛擬加工
DOI:
                        10.3969/j.issn.1000-1298.2008.9.080936
                    
CSTR:
                        
                    
作者:
                        
                        
                    
作者單位:
作者簡介:
通訊作者:
中圖分類號:
基金項目:

Author:

Affiliation:

Fund Project:

摘要

圖/表

訪問統計

參考文獻

相似文獻

引證文獻

資源附件

文章評論

摘要:

通過分析弧齒錐齒輪大輪齒頂?shù)菇羌庸ぴ恚茖Я嘶↓X錐齒輪大輪齒頂?shù)菇堑毒哕壽E模型，基于VERICUT虛擬加工軟件平臺,，建立了弧齒錐齒輪齒頂?shù)菇荖C機床模型及弧齒錐齒輪齒頂?shù)菇翘摂M加工模型。對一具體的弧齒錐齒輪進行了刀具軌跡計算,，并在VERICUT環境下進行了虛擬加工，測量結果表明弧齒錐齒輪大輪齒頂?shù)菇翘摂M加工模型滿足設計要求,。

Abstract:

Chamfering tooth crest of spiral bevel gears can effectively relieve stress concentration and reduce noise when spiral bevel gears are meshed, it can also extend service life and increase transmission stability of spiral bevel gears. A model of tools track on chamfering tooth crest of the bull spiral bevel gear was proposed based on analysis of the mechanism for chamfering tooth crest of the bull spiral bevel gear. The NC machine tool and virtual simulation machining models for chamfering the bull spiral bevel gear were carried out with VERICUT. The models of tools track and virtual simulation machining were verified by virtual simulation chamfering tooth crest on one given bull spiral bevel gear with the tools track calculated by Matlab. The measuring results indicate that the model of virtual simulation machining for chamfering the bull spiral bevel gear can meet the design requirements.  

參考文獻

相似文獻

引證文獻

引用本文

徐彥偉,肖鐵嶺,魏巍,劉德全,張連洪.弧齒錐齒輪大輪齒頂?shù)菇羌庸つＰ团c虛擬加工[J].農業機械學報,2008,39(9):161-165.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(9):161-165.

復制

文章指標

點擊次數:
下載次數:
HTML閱讀次數:
引用次數:

歷史

收稿日期:
最后修改日期:
錄用日期:
在線發布日期:
出版日期:

期刊瀏覽

EI收錄結果

引用本文

分享

文章指標

歷史

文章二維碼