ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

三螺桿擠壓機熔體輸送段功耗特性的數值分
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Simulation of Power Consumption Characteristics in Conveying Element in Triple Screw Extruder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    利用CFD技術,,采用三維流—熱耦合模型對三螺桿擠壓機流場,、溫度場、壓力場和粘性生熱分布進行了研究,。在此基礎上,,考慮熔體粘性耗散生熱和壓力升高的影響,,研究了螺桿轉速、螺紋頭數,、壓力差和擠出量等參數對三螺桿擠壓機擠出功耗和比能產量的影響,,并和常規雙螺桿擠壓機進行了對比分析。結果表明,,隨著螺桿轉速,、流道兩端壓力差和擠出量的增加,,三螺桿擠壓機的擠出功耗逐漸增加,而比能產量卻逐漸減小,。隨著螺桿螺紋頭數的增加,,三螺桿擠壓機的功耗和比能產量均逐漸增加。通過對比發現,,三螺桿擠壓機比能產量較雙螺桿擠壓機提高了

    Abstract:

    30%,。 The flow, temperature, pressure fields and viscous heating distribution in a triple screw extruder were studied by using computational fluid dynamics (CFD) method. The effects of screw rotational speeds, numbers of screw thread, pressure difference and flow rate on productivity ratio and power consumption were employed with considering temperature by pressure build-up and viscous dissipation. At the same time, the characteristics of power consumption of triple screw extruder were compared with those of traditional twin screw extruder. The results show that with the increase of screw rotation speed, pressure difference and flow rate, the power consumption of triple screw extruder increases and the productivity ratio of it decreases. With the increase of numbers of screw thread, the power consumption of triple screw extruder increases. By comparing, it is found that the productivity ratio of triple screw extruder increases 30% than that of twin screw extruder.

    參考文獻
    相似文獻
    引證文獻
引用本文

朱向哲,奚文.三螺桿擠壓機熔體輸送段功耗特性的數值分[J].農業機械學報,2009,40(5):119-123. Simulation of Power Consumption Characteristics in Conveying Element in Triple Screw Extruder[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(5):119-123.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼