ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于遺傳算法的工藝路線生成及優
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


and Optimization of Process Routing Based on Genetic Algorithm
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    針對計算機輔助工藝規劃中的工藝路線的決策問題,，通過實例介紹了一種基于遺傳算法的工藝路線優化算法,。首先將被加工零件劃分為若干特征元，采用反向設計法生成每個特征元的加工工序序列,；根據特征元之間的約束關系,，確定特征元的優先加工關系并建立優化目標函數,；設計了校驗程序以保證染色體的有效性；在目標函數的基礎上建立了適應度函數；設計了染色體的復制,、交換和突變算法,，然后利用遺傳算法對工藝路線進行優化。最后通過實例驗證了該算法的可行性和有效性,。

    Abstract:

    Aiming at the decision-making problem of process route in a CAPP system, an algorithm based on the genetic algorithm for optimization of process route was illustrated by an example. A machined part was divided into some feature cells machining chains of that were generated by reverse design. Then the preference sequence of feature cells was determined and the objective function was built. A checking program was designed to ensure the validity of chromosomes. The fitness function was built based on the objective function. The operator algorithms of replication, crossover and mutation were designed and the process route were optimized using the genetic algorithm. At last, the feasibility and effectiveness were verified by an example.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉偉,王太勇.基于遺傳算法的工藝路線生成及優[J].農業機械學報,2009,40(8):203-208. and Optimization of Process Routing Based on Genetic Algorithm[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(8):203-208.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼