ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

混流式水輪機轉輪優化設計的空化流計
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Simulation of Francis Turbine Runner for Hydraulic Optimization Design
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用求解時均N-S方程,，結合氣液質量輸運方程的兩相流方法,，在水輪機優化設計中進行轉輪的空化流場分析。結果顯示：在高水頭下適當增加葉片包角，延長出水邊,，數值計算效率為94.7%，明顯高于改型前的93.4%；葉片壓力分布更為均勻，最優工況點的臨界空化系數也低于改型前的0.03, 空穴區域減小,，轉輪的空化性能得到改善。計算結果與實驗結果相符,，為轉輪的再優化設計提供了參考依據,。

    Abstract:

    The simulation of cavitating flows in hydraulic runner for the hydraulic optimal design was presented by using the two-phase flow method through the solution of the time-average Navier-Stokes equations based on the mass transport equation. The results show that the efficiency apparently increases from 93.4% to 94.7% when the wrap angle of the blade enlarges and the trailing edges of the blade extend. The pressure on the blades is well distributed and the critical cavitation coefficient at optimum operating condition is lower than unmodified, 0.03, and the cavity domain are also decreased. Finally, the cavitation performance of runner is improved. The computational results, which agree with experimental data, provide a correct direction for further optimal design for the runner.

    參考文獻
    相似文獻
    引證文獻
引用本文

王磊,常近時.混流式水輪機轉輪優化設計的空化流計[J].農業機械學報,2009,40(9):98-102. Simulation of Francis Turbine Runner for Hydraulic Optimization Design[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(9):98-102.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼