ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于觸覺感知的水稻行彎度測量裝置設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

廣東省重點領域研發計劃專項(2019B020221002)、國家自然科學基金項目(51575195),、廣州市科技計劃項目(201803020021)和現代農業產業技術體系建設專項資金項目(CARS-01-43)


Design and Experiment of Tactile Sensing Device for Measuring Rice Curvature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為解決水田環境下稻行彎度信息提取問題,提出一種觸覺感知方法,。根據除草期內水稻與雜草的生理高度及力學差異,,基于彎曲傳感器設計了一種稻株定位的感知梁。通過力學分析,,建立了感知梁與稻株接觸作用的力學模型,,結合稻株抗彎強度,確定了感知梁抗彎剛度的設計原則,。在此基礎上,,構建感知梁標定試驗裝置,獲得了裝置偏距與感知梁電壓差的映射關系,。基于多傳感器技術,,通過采集4根感知梁的電壓(形變)變化特征,,計算出稻行彎度。為檢驗測量裝置的精度及穩定性,,進行了田間試驗,,行進速度試驗表明:行進速度的提高不利于測量結果的穩定性,在行進速度為1.5m/s時,,平均誤差為5.90mm,,最大誤差為8.30mm;稻穴株數試驗表明:測量誤差與稻穴株數有一定的相關性,,稻穴株數為6株以上的測量誤差最小,,平均誤差為2.56mm,4~5株的平均誤差較大,,為4.36mm,,1~3株測量的平均誤差最大,為6.17mm,;水層厚度試驗表明:測量誤差與水層厚度沒有明顯相關性,,誤差均能控制在14mm范圍內。該裝置測量結果可滿足避苗機械除草等精準控制的要求,。

    Abstract:

    In order to solve the technical problem of extracting rice row curvature information in paddy field environment, a tactile sensing method was proposed. According to the mechanical difference and the physiological height of rice and weeds during the weeding period, a kind of tactile beam which was based on bending sensor was designed. Though the mechanical analysis, a dynamic model of the contact between tactile beam and rice seedlings was established. Combined with the bending strength of rice seedling, the principle of the bending rigidity of the tactile beam was determined. Through building the tactile beam calibration test bench, the functional relationship between the device offset and the pressure difference of tactile beam was obtained. On this basis, based on multisensor technology, according to the voltage characteristics generated by the four tactile beams, the calculation method of rice seedling bending was proposed. In order to verify the measurement accuracy and the stability of the device, several field experiments were carried out. The test of speed of travel showed that the acceleration of travel speed was harmful to the stability. At the speed of 1.5m/s, the average relative error was 5.90mm and the maximum error was 830mm. The test of rice hole number indicated that the measurement error became lowest when the number of rice hole was more than 6 and the average error was 2.56mm. The average error was 6.17mm when the number of rice hole was between 1 and 3. The average error was 4.36mm when the number of rice hole was between 4 and 5. The test of water layer thickness indicated that there was no significant correlation between measurement errors and water layer thickness and the lateral offset of neighboring rice seedlings can be controlled within 14mm. The measurement result of this device can satisfy the requirement of accurate control such as rice mechanical weeding avoiding plants and provide new ideas and examples to solve the problem of crop identification and detection in the paddy field environment. 

    參考文獻
    相似文獻
    引證文獻
引用本文

陳學深,黃柱健,馬旭,齊龍,方貴進.基于觸覺感知的水稻行彎度測量裝置設計與試驗[J].農業機械學報,2020,51(2):45-53. CHEN Xueshen, HUANG Zhujian, MA Xu, QI Long, FANG Guijin. Design and Experiment of Tactile Sensing Device for Measuring Rice Curvature[J]. Transactions of the Chinese Society for Agricultural Machinery,2020,51(2):45-53.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-06-18
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2020-02-10
  • 出版日期:
文章二維碼