By using the 500N microcomputer control material testing machine, based on the load-depth curve, the hardness of the grains was experimentally studied adopting needlepoint pressing-in method. The peas, horsebeans, rice, mung beans, wheat, lentils as well as corn at different moisture and component parts were tested and analyzed, with the measured hardness range of 2~75MPa. The research showed that at the loading speed in 0.25~2.00mm/s and depth of indentation in 0.25~1.50mm, no obvious effect appears in the test results. The taper of needlepoint and the value of grain hardness have a quantitative relation in the measurement.
參考文獻
相似文獻
引證文獻
引用本文
張鋒偉,趙春花,郭維俊,趙武云,馮永忠,韓正晟.基于壓痕加載曲線的谷物籽粒硬度性能測定技[J].農(nóng)業(yè)機械學報,2010,41(4):128-133. of Grain Hardness Based on Indentation Loading Curve[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(4):128-133.