ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于CAD的噴涂機器人軌跡優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


of Spray Painting Robot Based on CAD
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對復雜自由曲面勻速和等行程間距噴涂方法,因曲面上曲率的變化會造成涂層厚度差較大的問題,提出一種基于CAD的軌跡優化算法以提高曲面的漆膜厚度一致性,。該方法首先根據平面上的噴涂試驗和微分幾何的面積放大定理推導出曲面上的漆膜生長模型,;然后通過掃描直接獲得工件表面點云模型,,采用點云切片技術獲取噴槍路徑和姿態,;最后采用沿路徑方向的速率優化算法和垂直路徑方向的間距優化算法對曲面上的噴槍軌跡進行優化,。仿真和試驗結果驗證了優化算法的有效性和軌跡生成算法的可行性,。

    Abstract:

    Due to the complex geometry of free-form surfaces, the generating optimization trajectories of spray gun satisfy the requirement of uniformity paint became a challenge. A quadratic function of the paint deposition rate on a plane was proposed according to the experimental data, and a model of paint deposition rate on a free-form surface was established. The point cloud model was obtained directly by scanning the surface of workpiece, and the position and pose of spray gun was obtained by point cloud slicing technique. The change of the surface curvature caused non-uniform paint deposition on freeform surface. An algorithm of variable spray speed optimization was established to compensate for the curvature change and improve the uniformity of paint deposition along passes. An algorithm for selecting the spacing between the passes was established to improve the deposition uniformity vertical to passes, and to reduce cycle time and paint waste. Finally, the simulation and experimental results illustrated the feasibility and availability of these optimization algorithms. 

    參考文獻
    相似文獻
    引證文獻
引用本文

李發忠,趙德安,張超,姬偉.基于CAD的噴涂機器人軌跡優化[J].農業機械學報,2010,41(5):213-217. of Spray Painting Robot Based on CAD[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(5):213-217.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼