ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

復合葉輪離心泵數值模擬正交試驗設計方法
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Orthogonal Test Design Method Based on Numerical Simulation for Non-overload Centrifugal Pump with Complex Impeller
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    按無過載離心泵設計要求,選擇對復合葉輪離心泵性能影響比較關鍵的葉片出口安放角β2,、葉片出口寬度b2,、喉部面積Ft和短葉片進口直徑Di的4個參數為變化因素按正交方案設計了9臺復合葉輪離心泵模型,。采用Fluent全流場數值模擬方法對設計的9臺模型泵進行正交試驗,,得到了各幾何參數對復合葉輪離心泵各性能指標影響的主次順序,, 并得出模型泵的最優設計方案,。對最優設計方案的樣機試驗表明,,全流場數值模擬方法的選 優結果在實現無過載的同時,,保持了較高效率,,達到了試驗?zāi)康摹Q芯拷Y(jié)果驗證了全流場數 值模擬正交試驗選優的可行性,。

    Abstract:

    Based on the design requirements of non-overload centrifugal pump, blade outlet angle β2, blade outlet width b2, throat area Ft and the inlet diameter of short blade Di, all of which affects the performance of centrifugal pump with complex impeller were chosen to design nine centrifugal pump models with complex impeller. Numerical simulation of whole flow field based on Fluent was adopted to do orthogonal test, the important order of geometric parameters affect the performance of centrifugal pump with complex impeller. The best design scheme for pump model was acquired. Through the test of specimen of the best design scheme, it demonstrated that the excellent selection by using numerical simulation of whole flow field was non-overload and high efficiency. Orthogonal test based on numerical simulation of whole flow field was verified by the research result.

    參考文獻
    相似文獻
    引證文獻
引用本文

沈艷寧,袁壽其,陸偉剛,張金鳳,袁建平.復合葉輪離心泵數值模擬正交試驗設計方法[J].農業機械學報,2010,41(9):22-26.Orthogonal Test Design Method Based on Numerical Simulation for Non-overload Centrifugal Pump with Complex Impeller[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(9):22-26.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼