ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于ANSYS/LS—DYNA的蘆竹切割—進給速度匹配研究
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

Fund of Independent Innovation of Huazhong Agricultural University (2011PY021)


Matching of Cutting and Feeding Speed for Reaping Arundo donax L. Based on ANSYS/LS
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    高粗莖稈作物因莖桿硬度和剛度大,，機械化收割難度大。以蘆竹為對象,，以高粗莖稈作物通用型回轉鏈?zhǔn)角懈钇鳛榛A(chǔ)，應用ANSYS/LS—DYNA建立了鋸片—蘆竹切割破壞動態模擬有限元模型,，動態模擬了蘆竹切割破壞過程,，試驗驗證了獲取鋸齒切割破壞蘆竹過程的載荷—位移歷程曲線的可行性及蘆竹破壞的模擬計算模型的有效性。提出了回轉鏈?zhǔn)角懈钇髑懈睢M(jìn)給速度匹配修正系數概念,，確定了切割蘆竹時進給速度和切割速度分別取1.00m/s和2.80m/s為最佳速度匹配,，其切割器工作速度匹配修正系數為1.22。研究結果為蘆竹收割機的傳統系統參數優化設計提供了理論依據,。

    Abstract:

    The crops with thick-tall stem are difficult to be harvested by machine due to hardness and stiffness of the stem. In the present study, a dynamic simulation model of Arundo donax L. penetration was established by finite element numerical simulation technology, of which based on a general rotary-chain cutter for thick-tall stem. The results showed that the optimized matching parameters of cutting process for cutting and feeding speed were 2.80m/s and 1.00m/s, respectively. The optimal correction factor of cutting process for Arundo donax L. was 1.22. The study provided a methodological basis for the analysis of cutting process for thick-tall stems.

    參考文獻
    相似文獻
    引證文獻
引用本文

廖宜濤,廖慶喜,舒彩霞,田波平,黃海東.基于ANSYS/LS—DYNA的蘆竹切割—進給速度匹配研究[J].農業機械學報,2011,42(Z1):30-34. Liao Yitao, Liao Qingxi, Shu Caixia, Tian Boping, Huang Haidong. Matching of Cutting and Feeding Speed for Reaping Arundo donax L. Based on ANSYS/LS[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(Z1):30-34.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼