ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

曲柄連桿式棉稈切割試驗臺設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家高技術研究發展計劃(863計劃)資助項目(2009AA043601)


Design and Experiment on Crank-connecting Rod Cotton Stalk Cutting Test Bench
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為研究棉花秸稈切割性能,為棉稈切割收獲裝備的開發提供技術支持和理論依據,,設計了可模擬棉稈不對行切割收獲過程的曲柄連桿式棉稈切割試驗臺,。試驗臺的棉稈喂入輸送速度與切割速度為0~2m/s、切割傾角為0°~15°,,并對樣機的工作性能和棉稈切割性能進行了試驗研究,。試驗結果表明,空載時切割器阻力的峰值隨著割刀平均切割速度的增加而增大,,單個工作周期內的切割器阻力功耗基本不受平均切割速度變化的影響,;棉稈峰值切割力隨割刀平均切割速度的增加而降低,切割棉稈單位消耗功隨割刀平均切割速度的增加而減小,。

    Abstract:

    In order to research cutting performance of cotton stalk for giving technical support and theoretical basis of the development of cotton stalk harvester, a crank-connecting rod cotton stalk cutting test bench was designed which could simulate the cutting harvest of cotton stalk with regardless of row. The feed conveying speed and the cutting speed of cotton stalk were regulated from 0 to 2m/s and the cutting angle was adjusted from 0° to 15°. The working performance of prototype and the cutting properties of cotton stalk were investigated. The results indicated that the peak of cutter resistance increased with the increase of the average cutting speed and the change of average cutting speed had no effect on the power consumption of cutter resistance in a working cycle when the cutting test bench was under no load running. In addition, the peak of cotton stalk cutting force and the power consumption that the unit cotton stalk was cut decreased with the increase of average cutting speed in the process of cutting cotton stalk.

    參考文獻
    相似文獻
    引證文獻
引用本文

宋占華,肖靜,張世福,李玉道,杜現軍,李法德.曲柄連桿式棉稈切割試驗臺設計與試驗[J].農業機械學報,2011,42(Z1):162-167. Song Zhanhua, Xiao Jing, Zhang Shifu, Li Yudao, Du Xianjun, Li Fade. Design and Experiment on Crank-connecting Rod Cotton Stalk Cutting Test Bench[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(Z1):162-167.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼