ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

面向零件群加工的可重構制造工藝設計方法
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目（50875208）


Process Designing Method of Reconfigurable Manufacturing for Part Family
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    將可重構制造工藝方案設計與可重構機床結構特點相結合,，以所建立的工序單元、工序段概念為出發點，通過對零件族加工信息的程式化處理,，建立了加工信息矩陣,，給出了工序單元?jiǎng)?chuàng)建方法和工序段方案的劃分方法,，通過交叉雙向組配方式獲得了多種滿足加工要求的工藝方案,；以所建立的工藝方案相似性判定模型為基礎,，找出可供可重構機床結構重構的合理工藝方案,，為實現零件群內部加工柔性化提供了科學依據,。最后以發動機缸蓋零件群加工工藝設計為例，驗證了方法的有效性,。

    Abstract:

    Reconfigurable manufacturing process design was combined with characteristics of reconfigurable machine tools. Beginning with the proposed process unit and process section, the processing information matrix was built through the processing information formulation. Then the processing unit was established and the division method of process section was proposed. Through the cross two way method, a variety of process schemes which meet the reconfigurable manufacturing requirements were obtained. Based on the similarity judgment model of processing plan, the reasonable processing schemes for the reconfiguration of reconfigurable machine tools were found out, which provided scientific basis for realizing the manufacturing flexibility in part family. Finally, an example of processing design for the cylinder front covers family was given to verify the validity of the proposed processing method.

    參考文獻
    相似文獻
    引證文獻
引用本文

張廣鵬,胡緒東,張新原,彭立立.面向零件群加工的可重構制造工藝設計方法[J].農業機械學報,2012,43(6):188-194,206. Zhang Guangpeng, Hu Xudong, Zhang Xinyuan, Peng Lili. Process Designing Method of Reconfigurable Manufacturing for Part Family[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(6):188-194,206.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-06-19
  • 出版日期:
文章二維碼