ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于NURBS的空間分度凸輪廓面重構與仿真
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目（50875153）,、“十一五”國家科技支撐計劃資助項目（2009BADA8B03）和山東省園藝機械與裝備重點實驗室資助項目


Profile Reconstruction of Spatial Indexing Cam and Simulation Based on NURBS
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用空間分度凸輪廓面方程獲取離散點云數據,，采用非均勻有理B樣條(NURBS)重構凸輪廓面,，構建空間凸輪參數化特征模型,?；谠撃Ｐ停M(jìn)行凸輪分度機構的運動學仿真,，生成加工制造模型,，實現空間凸輪NURBS廓面的仿真加工和四軸銑削NURBS創成。仿真和創成誤差分析結果表明,，從動件運動規律曲線更加光順,，最大速度Vmax和最大加速度Amax等運動特性值均優于修正正弦曲線，廓面創成誤差與加工路線的曲率有關,，最大誤差出現在曲率絕對值最大處且不超過0.01 mm,。因此，廓面NURBS重構技術,，是一種有效的空間凸輪設計和創成方法,。

    Abstract:

    To construct the spatial cam parametric feature model efficiently and accurately, discrete point cloud data were obtained by profile equation of spatial cam. Non-uniform rational B-splines (NURBS) was adopted to reconstruct the profile of spatial cam. Based on the parametric feature model, the spatial cam indexing mechanism was set up to perform kinematics simulation, and then the manufacturing model was generated to simulate the spatial cam NC machining. Finally, the spatial cam was machined on four-axis CNC machining center by NURBS interpolation method. The results showed the follower motion curves (the maximum velocity and acceleration) were smoother than modified-sine curves. The profile machining error related to the processing route curvature, the maximum was not more than 0.01mm and located in the maximum of the absolute curvature. Profile reconstruction based on NURBS was liable and effective for design and machining of spatial cam. 

    參考文獻
    相似文獻
    引證文獻
引用本文

玄冠濤,邵園園,呂釗欽,馮顯英.基于NURBS的空間分度凸輪廓面重構與仿真[J].農業機械學報,2012,43(6):226-229,234. Xuan Guantao,Shao Yuanyuan, Lü Zhaoqin, Feng Xianying. Profile Reconstruction of Spatial Indexing Cam and Simulation Based on NURBS[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(6):226-229,234.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-06-19
  • 出版日期:
文章二維碼