ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

多輥下壓式拉形柔性浮動夾持?jǐn)?shù)值模擬與實驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

歐盟第六框架協議計劃航空航天領域國際合作資助項目 (ASTS-CT-2006-030877)


Numerical Simulation and Experiment of Flexible Floating Clamping in Multi-roll Stretch Forming Process
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用ANSYS/LS-DYNA對使用柔性浮動夾持方式的多輥下壓式拉形過程進行了數值模擬,，驗證了柔性浮動夾持的效果，分析了所得成形件在拉形過程中的應力,、應變分布,。結果表明：柔性浮動夾持方式適用于多輥下壓式拉形,，能夠?qū)崿F(xiàn)柔性,、浮動夾持的效果；使用柔性浮動夾持時所得成形件應力,、應變分布均勻,，成形效果較好。完成了相關實驗驗證,，對數值模擬結果和實驗結果進行了對比,，結果表明：數值模擬結果與實驗結果吻合較好。

    Abstract:

    The multi-roll stretch forming process of saddle-shaped surface parts with flexible floating clamping mode were simulated by ANSYS/LS-DYNA. The effect of flexible floating clamping mode was verified. The distribution of stress and strain of formed parts was analyzed. Results indicated that the flexible floating clamping mode was suitable for the process of the multi roll stretch forming process. The stress and strain of the formed part distributed uniformly. Finally, the corresponding experiment was accomplished. When comparing the results of the numerical simulation and that of the experiment, it was concluded that the two types of results were nearly consistent.

    參考文獻
    相似文獻
    引證文獻
引用本文

張昊晗,李明哲,付文智,彭赫力,馮朋曉.多輥下壓式拉形柔性浮動夾持?jǐn)?shù)值模擬與實驗[J].農業機械學報,2012,43(6):230-234. Zhang Haohan, Li Mingzhe, Fu Wenzhi, Peng Heli, Feng Pengxiao. Numerical Simulation and Experiment of Flexible Floating Clamping in Multi-roll Stretch Forming Process[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(6):230-234.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-06-19
  • 出版日期:
文章二維碼