ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

拖拉機輪胎中心位置通用傳感器安裝支架設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(51105001);安徽省高等學校省級自然科學研究重點資助項目(KJ2011A101)


Design of General Sensor Installation Bracket on Tractor Tire Center Position
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    根據拖拉機動力學測試與控制系統開發的需要,確定了在拖拉機輪胎中心位置安裝通用傳感器的支架設計技術要求,,并進行了結構優化設計,。設計的支架總質量1.815kg,軸向尺寸可調節,,保證了支架主平面安裝時與輪胎旋轉平面平行且其旋轉中心與輪胎中心對齊。有限元分析表明,,在最壞H級路面,、車速90km/h、垂直沖擊和旋轉載荷輸入下支架最大變形量小于0.2mm,,不會增加傳感器因安裝造成的測量誤差,。設計了道路試驗系統,通過試驗驗證了支架工作的可靠性,。為中小規模農田機械化作業中對拖拉機進行導航輔助駕駛,,和拖拉機運動特性測試中在輪胎中心安裝傳感器提供了有效手段,。

    Abstract:

    For effective completion of tractor dynamics test and developing its control units, the technology requirements for general sensor installation bracket on tire center position was firstly determined, then the detailed structure was optimized and processed. The designed mass of bracket was 1.815kg and its axial length could be adjusted. The designed structure ensured that the principal plane of bracket was parallel to the tire rotary plane and its rotation center was aligned with the tire rotation center. The finite-element simulation analysis showed that the max deformation of the bracket was less than 0.2mm when loaded with vertical and rotation inertial forces at speed of 90km/h on the worst H level road, so it could not add systematical error on the measurement data. A roadway test system was developed and the reliability of the bracket was verified by the systematical roadway tests. This research provided a general and effective means to study the measurement problem on the rotation tire center, such as tractor assistant driving navigation system for mechanized working in small or medium scale farmland, tractor tire dynamics test, and so on.

    參考文獻
    相似文獻
    引證文獻
引用本文

張小龍,李亮,陳彬,曹成茂.拖拉機輪胎中心位置通用傳感器安裝支架設計與試驗[J].農業機械學報,2012,43(9):190-196. Zhang Xiaolong, Li Liang, Chen Bin, Cao Chengmao. Design of General Sensor Installation Bracket on Tractor Tire Center Position[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(9):190-196.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-09-04
  • 出版日期:
文章二維碼