ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

模塊化六自由度機械臂逆運動學解算與驗證
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家高技術研究發展計劃(863計劃)資助項目(2007AA041604)和安徽省博士后基金資助項目(DG081)


Inverse Kinematics Solution and Verification of Modular 6-DOF Manipulator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對六自由度模塊化串聯機械臂,,進行了正運動學求解,并提出了該種臂型的運動學逆解計算方法,。從機械臂的結構特點出發,采用DH法進行結構建模,,得到了正運動學模型,。在逆運動學求解過程中,針對純代數法找不到該種臂型的獨立不相關變量方程的問題,,采用幾何方法求解機械臂前3個關節,、后3個關節使用反變換法求解,通過給出解的組合原則,,得到了該機械臂逆運動學的完整解析解,。為滿足機器人系統編程和實際控制需要,基于VC++編制了MFC的運動學算法程序,,驗證了正逆運動學求解的正確性,,為機械臂精確定位和運動規劃提供了必要的前提條件。

    Abstract:

    Aimed at 6-DOF modular serial manipulator, forward kinematics was established and an inverse kinematics calculation method was proposed. To the structural characteristics of the manipulator, a forward kinematics model was conducted by using the DH method to describe the workspace. In the process of solving inverse kinematics, because the independent irrelevant variable equation can not be found by the pure algebra method, the geometry method was employed to solving the inverse kinematics of the first three joints, and the last three joints were solved by using algebra method. The complete analytical solution of the inverse kinematics was acquired by giving the combination principle of solutions. In order to meet the need of programming and actual control of robot system, the correctness of forward and inverse kinematics was validated by software developed based on MFC of VC++.

    參考文獻
    相似文獻
    引證文獻
引用本文

李憲華,郭永存,張軍,郭帥.模塊化六自由度機械臂逆運動學解算與驗證[J].農業機械學報,2013,44(4):246-251. Li Xianhua, Guo Yongcun, Zhang Jun, Guo Shuai. Inverse Kinematics Solution and Verification of Modular 6-DOF Manipulator[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(4):246-251.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2013-03-28
  • 出版日期:
文章二維碼