ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

農業機械自動導航車輪轉角測量誤差補償模型
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家高技術研究發展計劃(863計劃)資助項目(2013AA040403)和“十二五”國家科技支撐計劃資助項目(2011BAD20B06)


Compensation Model for Measurement Error of Wheel Turning Angle in Agricultural Vehicle Guidance
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    針對農業機械自動導航中，把主銷轉角當作車輪轉角來測量會造成測量誤差的問題,，通過對農業機械前輪轉向結構的分析,，建立了一種車輪-主銷轉角關系模型，該模型能夠補償把主銷當作車輪轉角來測量的誤差,，提高在農業機械自動導航時車輪轉角的測量精度,。仿真,、試驗并在雷沃M800型拖拉機上實際應用表明，該模型具有較好的合理性和準確性,，車輪轉角測量的平均誤差減小了0.48°,，最大誤差減小了0.71°，提高了農業機械自動導航系統的性能,。

    Abstract:

    A measurement error was caused by using the kingpin turning angle in place of the wheel turning angle in agricultural vehicle guidance. A relation model between the wheel turning angle and the kingpin turning angle was established to compensate the measurement error. Then, a simulation was carried out, showing that the error between the wheel turning angle and the kingpin turning angle increased with the increase of the kingpin inclination. Next, a test was conducted to verify the correctness of the model, and the results showed that the model improved the accuracy of measurement for the wheel turning angle. The mean error decreased by 0.48°, and the maximum error decreased by 0.71°after model compensation．Finally, in practical application, the proposed model improved the performance of agricultural vehicle guidance system.

    參考文獻
    相似文獻
    引證文獻
引用本文

王鶴,胡靜濤,高雷.農業機械自動導航車輪轉角測量誤差補償模型[J].農業機械學報,2014,45(8):33-37. Wang He, Hu Jingtao, Gao Lei. Compensation Model for Measurement Error of Wheel Turning Angle in Agricultural Vehicle Guidance[J]. Transactions of the Chinese Society for Agricultural Machinery,2014,45(8):33-37.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-08-28
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-08-10
  • 出版日期:
文章二維碼