ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

散體物料孔隙率測定裝置設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(31371871),、高等學校博士學科點專項科研基金資助項目(20114404110021)和廣東省產學研資助項目(2012B091000135)


Design and Test on Porosimeter for Particle Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為了提高散體物料孔隙率檢測精度及可靠性,基于理想氣體狀態方程,按照氣體置換法,,研制了一種定容型散體物料孔隙率的快速測定裝置,,開發了自動檢測控制系統,。在設定的0.1~0.4 MPa測量范圍內,采用可精確測得其體積且形態各異的標準不銹鋼球體,、塑料四棱柱體,、鵝卵石以及細石子的試驗結果發現,,系統的充氣壓力越高,,測量誤差相對越小且重復性越好。采用標準不銹鋼球體與圓柱體,,在孔隙率分別為16.02%,、25.14%、35.57%,、49.05%,、58.42%、67.79%,、76.57%,、85.36%、94.14%的標準條件下,,給出了補償系數的計算式,。在樣品填充率分別為25%、50%,、75%,、100%,充氣上限壓力為0.4 MPa的試驗條件下,,檢測濕基含水率為13.5%的稻谷的試驗結果顯示,,測量誤差極差為0.3%,證實了測量結果的可靠性,。

    Abstract:

    To improve detection precision and reliability of the porosimeter for particle materials, a constant volume porosimeter and an automatic control system were developed based on the ideal gas state equation and gas displacement method. In 0.1~0.4 MPa, the results showed that the higher the inflation pressure, the better the repeatability and precision of porosimeter when stainless steel balls, prisms, pebbles and fine stones were used in the test. The equation of error compensation was proposed through the calibration experiment using standard stainless steel balls and cylinders in the standard condition. The porosity of the samples were 16.02%, 25.14%, 35.57%, 49.05%, 58.42%, 67.79%, 76.57%, 85.36%, 94.14% respectively. In the inflation pressure limit of 0.4 MPa, with 13.5% wet basis of paddy porosity, the test results showed that the range of porosity was 0.3%, when filling rates of sample were 25%,50%,75%,100% respectively. The reliability of measurement was proved by the results.

    參考文獻
    相似文獻
    引證文獻
引用本文

李長友,方壯東,麥智煒.散體物料孔隙率測定裝置設計與試驗[J].農業機械學報,2014,45(10):200-206. Li Changyou, Fang Zhuangdong, Mai Zhiwei. Design and Test on Porosimeter for Particle Material[J]. Transactions of the Chinese Society for Agricultural Machinery,2014,45(10):200-206.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-05-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-10-10
  • 出版日期: 2014-10-10
文章二維碼