ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

非完全對稱氣動柔性彎曲關節力學特性實驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(51075363)和浙江省自然科學基金資助項目(LY12E05022)


Experimental Study on Mechanical Properties of Flexible Pneumatic Bending Joint
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為改進柔性機器人驅動器結構及數學模型,,提出了一種非完全對稱氣動柔性彎曲關節及其數學模型。為了實現其實時閉環控制系統,,進一步簡化了原有數學模型,,并對其力學特性進行了實驗研究。搭建了力學特性實驗平臺,,并對兩種不同規格(長度分別為40,、60mm)的關節進行了測試。采用Matlab曲線及曲面工具箱對測試結果進行分析,,得到了新型氣動柔性彎曲關節的經驗?zāi)P?。該?jīng)驗?zāi)P捅砻鳉鈩?dòng)柔性彎曲關節的彎曲角度與初始長度、關節內外氣壓差,、輸出力之間存在非線性關系,。與簡化的數學模型比較,該經驗?zāi)P途哂懈叩木?,其中輸出角度模型相?duì)誤差平均值小于6.7%,,輸出力模型相對誤差平均值小于2%。同時,,該經驗?zāi)P图m正了原有數學模型中,,認為關節初始長度與彎曲角呈正比的錯誤結論。

    Abstract:

    A new type of flexible pneumatic bending joint (FPBJ) and its mathematical model were proposed. To implement its real-time closed-loop control system, its mathematical model was simplified, and the mechanical characteristics were studied experimentally. An experimental platform for mechanical characteristics testing was set up, and two FPBJs with different length(40mm and 60mm) were tested. The experimental results were analyzed with Matlab curve and surface fitting toolbox, and the FPBJ empirical model was derived. The model showed a non-linear relationship among the bending angle, the FPBJs internal and external pressure difference, joint length and the output force of the FPBJs. Contrast to the simplified mathematical model, the empirical model was more precise, the mean relative error of output angle model was less than 6.7%, and the mean relative error of output force model was less than 2%. Meanwhile, an error, the joint length is proportional to the bending angle in the mathematical model, was avoided in the empirical model.

    參考文獻
    相似文獻
    引證文獻
引用本文

邵鐵鋒,張立彬,都明宇,鮑官軍,羅鑫遠,楊慶華.非完全對稱氣動柔性彎曲關節力學特性實驗[J].農業機械學報,2014,45(11):337-342. Shao Tiefeng, Zhang Libin, Dou Mingyu, Bao Guanjun, Luo Xinyuan, Yang Qinghua. Experimental Study on Mechanical Properties of Flexible Pneumatic Bending Joint[J]. Transactions of the Chinese Society for Agricultural Machinery,2014,45(11):337-342.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2013-12-17
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-11-10
  • 出版日期:
文章二維碼