ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

空間3-PUS-UP并聯機構運動靈巧性與剛度性能研究
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(51175143)


Kinematic Dexterity and Stiffness Performance of Spatial 3-PUS-UP Parallel Manipulator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    以含中間支鏈的3自由度3-PUS-UP并聯機構為研究對象,,充分考慮驅動支鏈、串聯約束支鏈及末端平臺伴隨運動的影響,,利用封閉矢量法求解位置逆解,,建立并聯驅動部分的雅可比矩陣;采用D—H法建立中間UP串聯約束支鏈的雅可比矩陣,。結合驅動方程和約束方程的關系,,構建了3-PUS-UP并聯機構完整的雅可比矩陣,建立該機構的運動學模型,,通過仿真驗證了雅可比矩陣的正確性,;引入運動靈巧性和機構剛度性能指標,并繪制運動靈巧性和機構剛度在工作空間中的分布圖譜,,研究機構的運動靈巧性和機構剛度在整個工作空間的分布情況,,建立了該機構基于運動學靈巧性的最優工作區域。研究表明,,該3-PUS-UP并聯機構具有良好的運動靈巧性與剛度性能,。

    Abstract:

    Three degrees of freedom parallel manipulator 3-PUS-UP with a properly constrained passive limb was taken as the research objective. Inverse kinematics solution equations were formulated with closed vector method, and a Jacobian matrix of parallel driving part was obtained considering the influences of driving chains, constraint chain and parasitic motion of moving platform. Further, a Jacobian matrix of UP limb of serial part was acquired by adopting the D—H method. Combining the relation between the driving equations with constraint equations, a complete Jacobian matrix of the 3-PUS-UP parallel manipulator was constructed and verified by simulation analysis on the basis of the previous kinematical model. Simultaneously, kinematic dexterity and stiffness were introduced to evaluate the kinematic performance, and distribution atlas of the kinematic dexterity and stiffness in the workspace were drawn and researched. The optimum regions of the kinematic dexterity in the reachable workspace were defined and calculated. The research results show that this 3-PUS-UP parallel manipulator has good kinematic dexterity and stiffness performance.

    參考文獻
    相似文獻
    引證文獻
引用本文

崔國華,張海強,徐豐,孫傳榮.空間3-PUS-UP并聯機構運動靈巧性與剛度性能研究[J].農業機械學報,2014,45(12):348-354. Cui Guohua, Zhang Haiqiang, Xu Feng, Sun Chuanrong. Kinematic Dexterity and Stiffness Performance of Spatial 3-PUS-UP Parallel Manipulator[J]. Transactions of the Chinese Society for Agricultural Machinery,2014,45(12):348-354.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2014-05-19
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2014-12-10
  • 出版日期:
文章二維碼