ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

Subsurface irrigation has been realized by burying pots, pitchers and subsurface porous pipe, but the present preparation process of porous ceramics could not meet the performance requirements of subsurface irrigation emitters. A new preparation process of clay-based porous ceramics used for subsurface irrigation with minimal cost was explored. The effects of the preparation process (shirking temperature, contents and particle size of slag in the green body) on flexural strength, linear shrinkage and open porosity of porous ceramic were discussed. Finally, the optimal preparation process of porous ceramic with high flexural strength, low linear shrinkage and elevated open porosity were selected. The results showed that the sintering temperature and the contents and particle size of slag in the green body were three key factors influencing the properties of porous ceramics. When sintering temperature was 1075℃ along with content of slag in the green body between 10% and 30%, the porous ceramics showed the best performance with maximum particle size of 0.613mm. Flexural strength of porous ceramic was 9.0~11.0MPa with open porosity of 36.8%~44.8% and the linear shrinkage was 3.8%~4.7%. Therefore, the clay-based porous ceramic could be the appropriate material for subsurface irrigation emitter.