ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于DCMFBM模型的軸流泵葉頂區云狀空化脫落預測
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目(51479083),、江蘇省優勢學科建設工程項目,、江蘇省產學研前瞻性聯合研究項目(BY2015064-08)和江蘇省重點研發計劃項目(BE2015001-3)


Prediction of Cloud Cavitation Shedding in Tip Region of Axial Flow Pump Based on DCMFBM Turbulence Model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為了深入研究軸流泵葉頂區云狀空化非定常脫落過程,應用二次開發技術將基于密度修正的RNG k-ε湍流模型的濾波器模型(Density correction method filter based model, DCMFBM))嵌入商業軟件ANSYS CFX中進行數值模擬,,并將模擬的結果與高速攝影試驗作對比,。數值模擬結果表明,,DCMFBM模型能夠成功地預測葉頂區云狀空化尾緣空穴的周期性脫落過程,與試驗值吻合較好,。隨著葉片的轉動,,脫落的空穴向相鄰葉片的壓力面運動,,運動過程中的破裂消失不僅影響了相鄰葉片壓力面載荷分布,同時會影響自身葉片吸力面載荷分布,;由于輪轂與葉片的相互作用,,形成了從輪轂到輪緣的徑向射流,徑向射流在運動到靠近葉頂區時,,會沖擊葉頂區空穴表面,,造成葉頂區空穴的脫落,同時徑向射流最終被葉頂泄漏渦吸收,。

    Abstract:

    A type of cavitation pattern named triangle cloud cavitation structure, which was formed by tip clearance cavitation, shear layer cavitation and tip leakage vortex cavitation, would cause some adverse effects on its shedding cavity at the trailing edge, such as diminished overall performance and efficiency, rotating instabilities, noise and vibration. Thus the mechanism of the phenomenon should be understood. For the sake of deeply studying the process of cloud cavitation shedding in the tip region of an axial-flow model pump, the filter-based model with modified density of RNG k-ε turbulence model was embedded into the commercial software ANSYS CFX by the secondary development technology for simulation. Simultaneously, the homogenous cavitation model was also adopted to simulate the unsteady cavitating turbulent flows. Some significant results were summarized. The simulation results were compared with experimental values. It could be concluded that the simulation results were agreed well with experimental values by successfully predicting the periodic process of cloud cavitation shedding in the tip region with DCMFBM turbulence model. With the rotation of blade, the shedding cavity was migrated towards the pressure side of neighboring blade and affected the load distribution of the pressure side;meanwhile, it also had impact on its load distribution on the suction side. A radial jet from the hub to the rim was found near the exit of blade, when it reached the blade tip, it eventually impinged on the cavity surface near the wall, which caused the formation of an open cavity with shed bubbly clouds. Then it was entrained into the TLV, forming an unstable and noisy spiraling pattern, which would enhance the instabilities of the flow field in tip region. It was possible that hub vortices characterizing wing-body junctions might have also played a role.

    參考文獻
    相似文獻
    引證文獻
引用本文

張德勝,石磊,陳健,耿琳琳,劉俊龍.基于DCMFBM模型的軸流泵葉頂區云狀空化脫落預測[J].農業機械學報,2016,47(8):22-28. Zhang Desheng, Shi Lei, Chen Jian, Geng Linlin, Liu Junlong. Prediction of Cloud Cavitation Shedding in Tip Region of Axial Flow Pump Based on DCMFBM Turbulence Model[J]. Transactions of the Chinese Society for Agricultural Machinery,2016,47(8):22-28.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-08-21
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2016-08-10
  • 出版日期: 2016-08-10
文章二維碼