ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

氣吸式排種器卸種機構設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃項目(2017YFD0700703),、國家自然科學基金項目(51575515)和國家玉米產業技術體系建設項目(CARS-02)


Design and Test of Unloading Mechanism of Air-suction Seed Metering Device
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為解決氣吸式排種器因吸孔堵塞,、種盤振動較大導致的漏播問題和氣流擾動引發的投種不均勻現象,優化設計了卸種機構,。改進了卸種機構安裝位置,確保排種器在攜種區能夠?qū)ΨN子有較好的吸附作用,防止飛種,,同時減少碰撞和彈跳,,使得種子在攜種區氣室末端脫落的概率相比于改進前降低了1.67%。推導出一種適用于卸種輪和種盤之間配合的齒面曲線,,并通過ADAMS仿真的方式,提取嚙合力、徑向力和軸向力3個指標,,模擬驗證了卸種輪齒設計的合理性,表明該曲線方程適用于不同種盤和吸孔數卸種輪的設計,,其嚙合平穩可靠,,具有良好的通用性。以卸種機構、前進速度和負壓為因素進行3因素試驗,,通過分析不同速度下卸種機構和負壓之間的差異性和試驗整體方差,,確定了影響合格指數、重播指數,、漏播指數的關鍵因素,。選取優化后的新卸種機構進行回歸分析,通過回歸方程得出所設計排種器在10,、12,、14km/h作業速度下的最佳作業參數,并進行了試驗驗證,。結果表明:新卸種機構能夠有效提高合格指數,、降低高速作業漏播指數和粒距變異系數,在作業速度為10~14km/h,、負壓為3.43~3.81kPa時,,合格指數達到96.8%,漏播指數小于等于2.0%,,重播指數小于等于1.2%,,各項指標優于國標要求。

    Abstract:

    In order to solve the problem of missing seeding caused by small impurities or damaged seeds blocking suction holes under the action of adsorption force in the process of filling, clearing and carrying seeds, the unloading mechanism was optimized. The installation position of seed unloading mechanism was improved to ensure that the seed metering device could adsorb seeds well in the seed-carrying area, prevent flying seeds, and reduce collision and bounce. The probability of seed falling off at the end of the air chamber in the seed-carrying area was reduced by 1.67% compared with that before the improvement. A gear tooth surface curve suitable for the coordination between the unloading wheel and the seed plate was deduced. By means of ADAMS simulation, three indexes of meshing force, radial force and axial force were extracted, and the rationality of the unloading gear tooth design was verified by simulation. The curve equation can be used to design unloading wheels with different kinds of plate and suction holes, which made the meshing stable and reliable and had good versatility. A comprehensive test was carried out with the unloading mechanism, forward speed and wind pressure as factors. By analyzing the significant difference between unloading mechanism and wind pressure at different speeds and the overall variance of the experiment, the key factors affecting the qualified index, multiple index and missing index were determined. The optimized new unloading mechanism was selected for regression analysis, through regression equation, the optimum operating parameters of the designed metering device at operating speeds of 10km/h, 12km/h and 14km/h were obtained, and the experimental verification was carried out. The results showed that the new unloading mechanism can effectively improve the qualified index and reduce the missing index of high-speed operation. When the operating speed was 10~14km/h and the wind pressure was -3.81~-3.43kPa, the qualified index can reach more than 96.8%, the missing index was not more than 2.0%, and the multiple index was not more than 1.2%. All the indexes were better than the requirements of national standards and can achieve effective seeding.

    參考文獻
    相似文獻
    引證文獻
引用本文

丁力,楊麗,張東興,崔濤,李玉環,高筱鈞.氣吸式排種器卸種機構設計與試驗[J].農業機械學報,2020,51(1):37-46. DING Li, YANG Li, ZHANG Dongxing, CUI Tao, LI Yuhuan, GAO Xiaojun. Design and Test of Unloading Mechanism of Air-suction Seed Metering Device[J]. Transactions of the Chinese Society for Agricultural Machinery,2020,51(1):37-46.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-05-16
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2020-01-10
  • 出版日期:
文章二維碼