ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

In order to provide a special spreader for cow bedding materials, a cow bedding material hammer spreader was designed. Taking sand as the research object, an operating theoretical model of the hammer spreading mechanism was established. The gyration radius of the hammer, spreading speed, spreading angle of the material, number and size of hammer were designed and calculated. The simulation model of sand spreading was established by EDEM, and the key factors such as spreading speed, tangent angle of spreading, opening angle of upper baffle, and length of upper baffle were simulated and analyzed. The influence of each factor on spreading width, average thickness of materials accumulated on the ground, and spreading uniformity was analyzed. The simulation results showed that by increasing the spreading speed and the opening angle of the upper baffle, reducing the tangent angle of spreading and the length of upper baffle, the spreading width and spreading uniformity of the sand accumulated on the ground can be improved, and the average thickness of sand accumulated on the ground can be reduced. Under the condition that the spreading speed was 1200r/min, the spreading tangent angle was 35°, the opening angle of the upper baffle was 70°, the length of the upper baffle was 180mm, and the driving speed was 4km/h, simulations and tests were carried out. Simulation results were in good agreement with experimental data, and the reliability of the simulation analysis was confirmed. The effective spreading width was 5.1m, and the average thickness was 22mm, and the coefficient of variation of the uniformity of spreading was 31.96%, the requirement of farms was met.