ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

In order to explore the feasibility of the straw multi-stage continuous cold roll forming method, a prototype was designed and tested. Orthogonal test method was used to test the four-factor three-level orthogonal test with the moisture content, crushing method, crushing length and feeding method of corn straw as the test factors, and the rebound rate, density and firmness of the formed blocks as the test indicators. The influence of experimental factors on experimental indicators was researched. The test results showed that the cross-riveted feeding method can most restrict the rebound of the shaped block;the density of the shaped block was mainly affected by the crushing method, followed by the length of the crushing;the solidity of the shaped block was mainly affected by the crushing method, and the moisture content was the second of it. Comprehensive analysis determined that the preferred forming parameters of the molding machine were: moisture content of 20%, crushing method by rubbing and crushing, crushing length of 80mm, feeding method by cross riveting. The experiment was carried out under the conditions of better molding parameters, and the performance indicators of the molding machine were tested. The results showed that the rebound rate of corn straw molding block produced by the molding machine was 7.26%, the molding density was 363.28kg/m3, and the firmness was 90.23%. The research results provided a reference for the research and development of biomass compression molding technology and equipment at normal temperature.