ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

油菜種子甩盤式丸化加工試驗與參數優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃項目(2018YFD0101000)


Processing Test and Parameter Optimization on Rotary Disc Pelleting Machine for Rapeseeds
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為研究油菜種子丸?;诵墓に噷?duì)成丸質量的影響,,分析了油菜種子丸化過程的接觸力學,構建丸化過程的仿真模型,,開展驗證試驗,,優化油菜種子丸粒化加工工藝,。接觸力學分析結果表明,,種丸粘結包敷的前提是種丸-粉劑顆粒碰撞過程中的相對切向速度小于閾值,二者未發生相對滑動,;較大的法向接觸力可提高最大靜摩擦力,、壓實丸粒粘結,促進成丸質量,;而對于種丸-種丸,、粉劑-粉劑間接觸,增大切向接觸力,、降低法向接觸力,,有利于減少多籽、空丸及形變等問題發生,。仿真結果表明,,當甩盤轉速為1200r/min時,種丸-粉劑的速度均差為0.22m/s,,創造靜止粘結條件,;種丸和粉劑速度分布標準差為0.42、0.52m/s,,種丸-種丸,、粉劑-粉劑的平均速度影響多籽和空丸產生。供粉速度影響核心粘結區域種子和粉劑的比例,,粉劑過多形成空丸,、浪費粉劑,粉劑不足降低包敷效率,。正交試驗極差和方差分析結果表明,粉液比是影響成丸質量的最主要因素,,丸?;筒朔N子最佳工藝參數:甩盤轉速為1200r/min、粉液比為2.1,、供粉速度為24g/min,,此時成丸合格率為95.7%,單籽率為94.9%,包敷效率為1.8kg/h。研究結果揭示了種子丸?;瘷C(jī)理,,形成了油菜種子丸?;庸すに嚕欣谔嵘筒朔N子加工水平,。

    Abstract:

    In order to study the influence of the core process of rapeseed pelletizing on the pellet quality, the contact mechanics of rapeseed pelletizing process were analyzed, a simulation model of the pelletizing process was constructed, validation tests were conducted and the rapeseed pelletizing process was optimized. The contact force analysis results led to the following conclusions: the tangential velocity was less than the threshold value, and no sliding friction occurred, which was the premise of bonding and coating. A larger normal contact force can increase the maximum static friction force, compact the pellet bonding, and promote the quality of pellets. Increasing the tangential contact force and reducing the normal contact force of pellets-pellets and powder-powder were beneficial to reduce the occurrence of problems such as multiple seeds, empty seeds, and deformation. The simulation analysis results showed 〖JP3〗that when the rotating speed was 1200r/min, the average speed of seed pellets and powder was 0.22m/s, creating static bonding conditions; the standard deviation of the speed distribution of seed pellets and powder was 0.42m/s and 0.52m/s; the average velocity of pellets-pellets, powder-powder, affected multiple seeds and empty seeds production. The powder supply speed affected the ratio of seeds to powder in the core bonding area. Too much powder formed empty seeds and wastes powder, and insufficient powder reduced the coating efficiency. The results of the orthogonal test showed that the powder-to-liquid ratio was the most important factor affecting the quality of pelletizing. The optimal parameters of the pelletizing rapeseed processing technology were obtained as follows: when the rotating speed was 1200r/min, the powder-to-liquid ratio was 2.1, and the powder supply speed was 24g/min, the qualified pellet rate was 95.7%, the single-seed rate was 94.9%, and the efficiency of pelletizing was 1.8kg/h. The research revealed the mechanism of seed pelletization and formed the process of rape seed pelletization, which was beneficial to promote the improvement of rapeseed seed processing level.

    參考文獻
    相似文獻
    引證文獻
引用本文

張帥揚,呂程序,白圣賀,吳金燦,杜愛麗,毛文華.油菜種子甩盤式丸化加工試驗與參數優化[J].農業機械學報,2022,53(s2):131-140. ZHANG Shuaiyang, Lü Chengxu, BAI Shenghe, WU Jincan, DU Aili, MAO Wenhua. Processing Test and Parameter Optimization on Rotary Disc Pelleting Machine for Rapeseeds[J]. Transactions of the Chinese Society for Agricultural Machinery,2022,53(s2):131-140.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-06-23
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2022-08-22
  • 出版日期:
文章二維碼