ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

基于參考軌跡實時修正的機器人軌跡跟蹤控制方法
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目(52075530,、51575407,、51505349、61733011,、41906177)


Robot Trajectory Tracking Control Based on Reference Trajectory Real-time Modification
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對動力學不確定性的機器人軌跡跟蹤問題,,本文提出一種基于參考軌跡實時修正的機器人軌跡跟蹤控制方法。將軌跡跟蹤中已產生的誤差進行累加,,實時前饋補償?shù)絽⒖架壽E上即將被跟蹤的點上,。給出了該方法的控制框圖,由控制框圖導出跟蹤誤差與命令誤差之間的關系式,。關系式表明只需控制器中的控制算法保證速度誤差穩定,,即可保證跟蹤誤差收斂。此外,,提高補償增益的值可以提高誤差的收斂速度,。分析PD控制律能滿足所提方法的收斂條件。給出了所提方法中參數的調節方案,。通過仿真和實驗驗證了該方法的有效性,。實驗結果表明,,各個關節跟蹤軌跡1得到的誤差絕對值均不大于0.0087rad;跟蹤軌跡2得到的誤差絕對值均不大于0.0059rad,。

    Abstract:

    A simple and effective control method for robot trajectory tracking with uncertain dynamics was presented. The core idea of the proposed method was to modify the reference trajectory in real-time. The main operation of this method was to accumulate the generated tracking errors and compensate them feedforward in real-time to the points to be tracked on the reference trajectory. Firstly, the control block diagram for the proposed method was showed. Then, the equation for the relationship between the tracking error and the command error was derived from the control block diagram. The equation showed that the control algorithm in the controller only needed to ensure that the velocity error was stable and the tracking error would converge. The increase in compensation gain can also accelerate the convergence of the error. Subsequently, the convergence condition that PD control law can satisfy the proposed method was analyzed. At the same time, the adjustment scheme of parameters in the proposed method was given. Finally, the effectiveness of the proposed method was verified by simulation and physical experiment. In the physical experiment, the absolute value of error obtained from tracking trajectory 1 of each joint was no more than 0.0087rad; the absolute value of error obtained from tracking trajectory 2 of each joint was no more than 0.0059rad.

    參考文獻
    相似文獻
    引證文獻
引用本文

肖帆,李公法,章曉峰,陶波,蔣國璋,李光.基于參考軌跡實時修正的機器人軌跡跟蹤控制方法[J].農業機械學報,2023,54(2):441-449. XIAO Fan, LI Gongfa, ZHANG Xiaofeng, TAO Bo, JIANG Guozhang, LI Guang. Robot Trajectory Tracking Control Based on Reference Trajectory Real-time Modification[J]. Transactions of the Chinese Society for Agricultural Machinery,2023,54(2):441-449.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-03-24
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2022-04-27
  • 出版日期:
文章二維碼