ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

夾持輥式棉稈拔取裝置設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

新疆維吾爾自治區重點研發任務專項(2022B02033)


Design and Test of Clamping-roller Cotton Stalk Pulling Device
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對現有棉稈收獲機械拔斷率、漏拔率高,,作業時需對行等問題,,設計了一種夾持輥式棉稈拔取裝置。該裝置主要由棉稈拔取機構,、棉稈輸送機構組成,,通過對棉稈拔取機構作業過程進行運動學與動力學分析確定了各零部件的結構參數與工作參數。為了驗證棉稈拔取裝置工作的可靠性與作業性能,,以機具前進速度,、上拔稈輥轉速、機具前進速度與撥稈輪線速度比值(簡稱速比)作為試驗因素,,棉稈拔斷率,、漏拔率為試驗指標進行了三因素三水平二次回歸響應面試驗,,建立了回歸模型,分析了各因素對棉稈拔取裝置作業性能的影響,,并進行了參數優化與試驗驗證。試驗結果表明:影響棉稈拔斷率的因素主次順序為上拔稈輥轉速,、機具前進速度,、速比;影響棉稈漏拔率的因素主次順序為速比,、機具前進速度,、上拔稈輥轉速。優化后的工作參數為:機具前進速度0.60m/s,、上拔稈輥轉速46r/min,、速比0.50,以此參數組合進行田間試驗,,得到棉稈拔斷率為3.68%,,漏拔率為5.19%,與理論優化值相對誤差不超過5%,,研究結果可為棉稈拔取裝置的設計提供參考

    Abstract:

    In response to the existing cotton stalk harvesting machinery has high breakage rate, high leakage rate, and the need of work on rows and other problems, a clamping-roller cotton stalk pulling device was designed. The device was mainly composed of cotton stalk pulling mechanism and cotton stalk conveying mechanism, and the structural parameters and working parameters of each component were determined through the kinematic and dynamics analysis of the operation process of the cotton stalk pulling mechanism. In order to verify the reliability and operational performance of the cotton stalk pulling device, a three-factors, three-levels quadratic regression orthogonal test was conducted with the forward speed of machine, the speed of upper stalk pulling roller, the ratio of forward speed of the machine to the linear speed of the stalk plucking wheel (referred to as the speed ratio) as the test factors, and the stalk breakage rate and the leakage rate as the test indexes. A regression model was established to analyze the influence of each factor on the operational performance of the cotton stalk pulling device, and parameter optimization and test verification were carried out. The test results showed that the factors affecting the stalk breakage rate in the main order was upper stalk roller speed, machine forward speed and speed ratio;the factors affecting the stalk leakage rate in the main order was speed ratio, machine forward speed and upper stalk roller speed. The optimized working parameters was as follows: machine forward speed of 0.60m/s, upper stalk roller speed of 46r/min and speed ratio of 0.50 for field test, the combination of these parameters was tested in the field, and the stalk breakage rate was 3.68%, and leakage rate was 5.19%, the relative error with the theoretical optimized value was not more than 5%, the research results can provide reference for the design of cotton stalk pulling device.

    參考文獻
    相似文獻
    引證文獻
引用本文

謝建華,吳仕花,曹肆林,張毅,趙維松,周金豹.夾持輥式棉稈拔取裝置設計與試驗[J].農業機械學報,2023,54(5):101-111. XIE Jianhua, WU Shihua, CAO Silin, ZHANG Yi, ZHAO Weisong, ZHOU Jinbao. Design and Test of Clamping-roller Cotton Stalk Pulling Device[J]. Transactions of the Chinese Society for Agricultural Machinery,2023,54(5):101-111.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2022-08-15
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2023-05-10
  • 出版日期:
文章二維碼