ass日本风韵熟妇pics男人扒开女人屁屁桶到爽|扒开胸露出奶头亲吻视频|邻居少妇的诱惑|人人妻在线播放|日日摸夜夜摸狠狠摸婷婷|制服 丝袜 人妻|激情熟妇中文字幕|看黄色欧美特一级|日本av人妻系列|高潮对白av,丰满岳妇乱熟妇之荡,日本丰满熟妇乱又伦,日韩欧美一区二区三区在线

網帶式花椒干燥機流場模擬與結構優化
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

四川省科技廳重點研發項目(2023YFG0049,、2022YFG0065)和四川省現代農業裝備工程技術研究中心項目(XDNY2021-003)


Flow Field Simulation and Structural Optimization of Mesh-belt Pepper Drying Machine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    花椒干燥過程中網帶式花椒干燥機內氣流強度和均勻性影響花椒干燥后品質,通過實驗進行花椒參數測定和模型可靠性驗證,,采用多孔介質模型對結構優化前后網帶式花椒干燥機流場進行數值模擬研究,,根據網帶式花椒干燥機氣流分布特性提出了增加導流板的優化方案,,考察了不同角度導流板氣流分布特性。結果表明:導流板角度變化對干燥機氣流強度與均勻性有一定影響,,最優導流板角度為2.5°,,較原始結構在干燥機XY、XZ,、YZ面平均速度平均增加6.8%,、10.8%、5.2%,,不均勻系數平均減小8.7%,、8.5%、2.7%,。

    Abstract:

    In the process of pepper drying, the airflow intensity and uniformity in the mesh-belt pepper dryer will affect the quality of pepper after drying. The results of pepper parameters were measured by experiments to set the parameters of porous media. The flow field model of the drying chamber was constructed by ANSYS Fluent and the reliability of the model was verified. The average velocity and non-uniformity coefficient M were used to characterize the airflow intensity and uniformity of the drying chamber. The porous media model was used to simulate the flow field of the meshbelt pepper dryer before and after structural optimization. The results showed that the adjacent air inlets of the original structure of the mesh-belt dryer were arranged in opposite directions, which caused the airflow to disperse and converge to produce eddy current. The pressure at the airflow confluence was increased, the airflow flow was blocked, and the flow velocity was decreased. The flow velocity at the center of the eddy current was extremely low, resulting in the unevenness of the overall flow field. According to the airflow distribution characteristics of the mesh-belt dryer, a structural optimization scheme for increasing the deflector was proposed. The change of the deflector angle increased the average velocity of the airflow and reduced the nonuniformity coefficient. When the deflector angle was 0 °~7.5°, the drying chamber had the best airflow intensity and uniformity, so the deflector deflection angles were set to be 0°, 2.5°, 5°, and 7.5°. The influence of four angles of the deflector on the airflow in the drying chamber was analyzed. When the angle of the deflector was 2.5°, the airflow distribution was optimal. Compared with the original structure, the average velocity increments on the XY, XZ, and YZ planes of the dryer were 6.8%, 10.8% and 5.2%, respectively, and the non-uniformity coefficient was reduced by 8.7%, 8.5% and 2.7% on average.

    參考文獻
    相似文獻
    引證文獻
引用本文

董霖,王爽,歐陽銳凌,曾高升,譚果,何光贊.網帶式花椒干燥機流場模擬與結構優化[J].農業機械學報,2023,54(s1):373-380. DONG Lin, WANG Shuang, OUYANG Ruiling, ZENG Gaosheng, TAN Guo, HE Guangzan. Flow Field Simulation and Structural Optimization of Mesh-belt Pepper Drying Machine[J]. Transactions of the Chinese Society for Agricultural Machinery,2023,54(s1):373-380.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-06-02
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2023-12-10
  • 出版日期:
文章二維碼